Concrete Sawing Waste Recycling As Microfiller in Concrete Production

Authors

  • G. Bumanis Riga Technical University (LV)
  • G. Shakhmenko Riga Technical University (LV)
  • P. Kara Riga Technical University (LV)
  • A. Korjakins Riga Technical University (LV)

DOI:

https://doi.org/10.17770/etr2011vol1.887

Keywords:

concrete sawing waste, sludge water, compressive strength

Abstract

The main idea of the presented work is to find the ways of recycling the sawing waste/sludge in production of the new concrete. The aim of the study is to examine application of the dust-water suspension as micro filler in self-compacting concrete. In the process of sawing concrete elements a lot of dust waste is produced, the average amount being approximately 0.5-1% of the total amount of concrete. To avoid dust pollution in a production plant the sawing process is accompanied by a water stream, as a result, concrete dust as dust-water suspension is stored in special reservoirs. Recycling of such concrete dust suspension and its utilization as a material pose a significant challenge.

Downloads

Download data is not yet available.

References

Chatveera, B., Lertwattanaruk, P., Makul, N. Effect of sludge water from ready-mixed concrete plant on properties and durability of concrete. Cement and Concrete Composites 28, 2006, p. 441–450.

Chatveera, B., Lertwattanaruk, P. Use of ready-mixed concrete sludge water in concrete containing an additive or admixture, Journal of Environmental Management 90, 2009, p. 1901-1908.

Sato, Y., Kiyohara, C., Chia-Ming, L. Studies on the effective use of concrete sludge - sludge water and pulverized dry sludge, Exploiting wastes in concrete: seminar 5, 1999, p. 37-46

Borger, J., Carrdsguillo, R., Fowler, D. Use of Recycled Wash Water and Returned Plastic Concrete in the Production of Fresh Concrete, J. of Advanced Based Materials, 1994, p. 267-274

Souwerbren, C. Re-use of wash water in the concrete industrial production circle without waste. European standard for mixing water and the re-use of wash water, proc., of the Conf., Concrete in the service of mankind, concrete for environmental and protection, edited by R.K. Dhir & T.D. Dyer, 1996, p.183-197

Sandrolini, F., Franzoni, E. Waste wash water recycling in ready-mixed concrete plants. Cement and Concrete Research 31, 2001, p. 485–489.

Su, N., Miao, B., Liu, F. Effect of wash water and underground water on properties of concrete. Cement and Concrete Research 32, 2002, p. 777–782.

Chini, A.R., Muszynski, L.C. Reuse of wastewater at concrete plants in Florida in the production of fresh concrete. Magazine of Concrete Research 53 (5), 2001, p. 311–319.

Paolini, M., Khurana, R. Admixtures for recycling of waste concrete. Cement and Concrete Composites 20, 1998, p. 221–229.

EN 12390-2:2002. Testing hardened concrete - Part: 2: Making and curing specimens for strength tests. LVS. Riga, 2002. 7 p.

EN 12390-3:2002. Testing hardened concrete - Part 3: Compressive strength of test specimens. LVS. Riga, 2002. 16 p.

Draft prEN 12350-8. Testing fresh concrete – Part 8: Self-compacting concrete – Slump-flow test. Brussels, 2007. 8 p.

Drafr prEN 12350-9. Testing fresh concrete – Part 9: Self-compacting concrete – V-funnel test. Brussels, 2007. 6 p.

12730.3-78 "Бетоны. Метод определения водопоглощения" (Concretes. Method for determining water absorption)

Downloads

Published

2015-08-05

How to Cite

[1]
G. Bumanis, G. Shakhmenko, P. Kara, and A. Korjakins, “Concrete Sawing Waste Recycling As Microfiller in Concrete Production”, ETR, vol. 1, pp. 346–352, Aug. 2015, doi: 10.17770/etr2011vol1.887.