EVALUATION OF WEAR MECHANISM OF SPECIAL PURPOSE MACHINE ELEMENTS
DOI:
https://doi.org/10.17770/etr2024vol4.8198Keywords:
Machine elements, tribology, wearAbstract
The purpose of the paper is to evaluate the wear mechanism that occur in the artillery armament main part – gun tube. In order to achieve this purpose, the mechanism of wear has been derived by means of studying the information from literary sources and drawing conclusions. The topicality of the topic is dictated by the constant aspiration of scientists to derive a new theory, reduce the manufacturing resources and increase the wear resistance of the gun tube. The study of the problem led to an assessment of the processes occurring in the gun tube of the artillery system. As a result of the study, it can be pointed that a different theory of the wear mechanism of special purpose machine elements has been established.Downloads
References
A. Tuktanov, Production process of small arms gunnery and artillery weapons. M., 2007.
B. Bhushan, Introduction to Tribology. 2nd Edition. USA, 2013.
B. J. Heard, Handbook of firearms and ballistics: Examining and interpreting forensic evidence. Second edition. John Wiley & Sons, 2008.
D. E. Carlucci and S. S. Jacobson, Ballistics: Theory and design of guns and ammunitions. N.Y.: CRC, 2007.
H. Rebai, „Tribology and machine elements: Mechanical engineering and production technology,“ B. thesis, University of applied sciences. Riihimäki: HAMK, 15.08.2014.
J. Jain, S. L. Soni and D. Sharma, “Determination of wear rate equation and estimation of residual life of 155 mm autofrettaged gun barrel,” Int. Jnl. of Multiphysics, Volume 5, Number 2011. Available: Research Gate https://www.researchgate.net/. [Accessed February 5, 2024].
J.-s. Ma, „The law of barrel wear and its application,“ Defence Technology, Volume 14, Issue 6, pp. 674-676, December 2018. [Online]. Available: Scince Direct, https://www.sciencedirect.com. [Accessed February 3, 2024], https://doi.org/10.1016/j.dt.2018.06.012
M. J. Neale, The tribology handbook. Second edition. BH, 2001 г.
R. C. Juvinall and K. M. Marshek, Fundamentals of machine component design. Fifth Edition. Wiley, 2012.
R. G. Hasenbein, “Wear and erosion in large caliber gun barrels,” Defence technical information centre, 2004, [Online]. Available: DTIC, https://apps.dtic.mil/. [Accessed February 9, 2024].
V. Yastrebov and G. Anciaux, Eds., From infinitesimal to full contact between rough surfaces: Evolution of the contact area. HAL, 13.08.2015 г.
Б. П. Сафонов и А. В. Бегова, Инженерная трибология: Оценка износостойкости и ресурса трибосопряжений. Новомосковск, 2004.
В. Л. Попов, Механика контактного взаимодействия и физика трения. От нанотрибологии до динамики землетрясений. Москва, 2013.
Г. Ганев, Р. Лазаров и Б. Банков, “Подход за определяне на балистични характеристики на боеприпасите,” Сборник доклади от International scientific conference “Defense Technology Forum 2023”, с. 285-289, ISSN 2815-4274, Shumen, 2023, [Онлайн]. Достъпна: DTF, https://dtf.aadcf.nvu.bg/archives/.
Г. С. Здравчева, „Изследване на износоустойчиви покрития, нанесени върху електрохимично обработени детайли“, Дисертационен труд, Технически университет – София, Факултет „Инженерно-педагогически факултет“. Сливен, 2023. [Онлайн]. Достъпна: НАЦИД, https://nacid.bg. [Посетено Януари 30, 2024].
И. И. Беркович и Д. Г. Громаковский, Трибология: Физические основы, механика и технические приложения. Самара, 2000.
К. Г. Калев, Влияние на изменението на геометрията на канала върху балистичните параметри на оръдейното тяло. Шумен, 2017.
К. Г. Люцканов, „Изследване влиянието на факторите на абразивното износване при наваряване на детайлите от драгажния флот“, Дисертационен труд, ВВМУ „Никола Йонков Вапцаров”, Факултет „Инженерен”. Варна, 2017. [Онлайн]. Достъпна: НАЦИД, https://nacid.bg. [Посетено Януари 30, 2024].
М. Кандева, Инженерна трибология: Цикъл лекции за докторанти, ТУ-София: МТФ, 2012.
М. Серебреков, Вътрешна балистика. София, 1996.
Н. Манолов и М. Кандева, Обща трибология. София, 2004.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Yana Dimitrova
This work is licensed under a Creative Commons Attribution 4.0 International License.
