OPTIMIZATION OF A TECHNOLOGICAL PROCESS FOR HEAT TREATMENT OF CU99.9 WITH DIFFERENT DEGREES OF PLASTIC DEFORMATION
DOI:
https://doi.org/10.17770/etr2024vol3.8138Keywords:
recrystallization annealing, plastic deformation, microstructure, Cu99.9Abstract
Different degrees of plastic deformation of Cu99.9 have been achieved by using different technological forming processes. Recrystallization annealing was carried out at different time-temperature regimes. The influence of the degree of plastic deformation and the recrystallization annealing conditions on the structure of the studied material (Cu99.9) is discussed. The technological process of heat treatment is optimized.
Downloads
References
X. Wu, M. Yang, F. Yuan, G. Wu, Y. Wei, X. Huang, Y. Zhu – „Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility“ - Proc. Natl. Acad. Sci. Unit. States Am., 112 (2015), pp. https://doi.org/10.1073/pnas.1517193112
W. Jiang, Y. Cao, Y. Jiang, Y. Liu, Q. Mao, H. Zhou, X. Liao, Y. Zhao - Effects of nanostructural hierarchy on the hardness and thermal stability of an austenitic stainless steel J. Mater. Res. Technol., 12 (2021), pp. https://doi.org/10.1016/j.jmrt.2021.02.100
Y. Liu, Y. Cao, Q. Mao, H. Zhou, Y. Zhao, W. Jiang, Y. Liu, J.T. Wang, Z. You, Y. Zhu – „Critical microstructures and defects in heterostructured materials and their effects on mechanical properties“ - Acta Mater., 189 (2020), pp. https://doi.org/10.1016/j.actamat.2020.03.001
Werner Skrotzki, Nils Scheerbaum, Carl-Georg Oertel, Roxane Arruffat-Massion, Satyam Suwas, László S. Tóth – „Microstructure and texture gradient in copper deformed by equal channel angular pressing“ Acta Materialia, Volume 55, Issue 6, April 2007, Pages 2013-2024
https://doi.org/10.1016/j.actamat.2006.11.005
X. Molodova, G. Gottstein, M. Winning, R.J. Hellmig – „Thermal stability of ECAP processed pure copper“ - Materials Science and Engineering: A Volumes 460–461, 15 July 2007, Pages 204-213 https://doi.org/10.1016/j.msea.2007.01.042
X.H. An, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao b, T.G. Langdon – „Evolution of microstructural homogeneity in copper processed by high-pressure torsion“ - Scripta Materialia
Volume 63, Issue 5, September 2010, Pages 560-563
https://doi.org/10.1016/j.scriptamat.2010.05.030
X.H. An, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao c, T.G. Langdon – „Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing“ - Scripta Materialia, Volume 66, Issue 5, March 2012, Pages 227-230
https://doi.org/10.1016/j.scriptamat.2011.10.043
W.S. Zhao, N.R. Tao, J.Y. Guo, Q.H. Lu, K. Lu – „High density nano-scale twins in Cu induced by dynamic plastic deformation“ - Scripta Materialia, Volume 53, Issue 6, September 2005, Pages 745-749 https://doi.org/10.1016/j.scriptamat.2005.05.022
Y.S. Li, N.R. Tao, K. Lu – „Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures“ - Acta Materialia, Volume 56, Issue 2, January 2008, Pages 230-241 https://doi.org/10.1016/j.actamat.2007.09.020
Y. Zhao, T. Topping, Y. Li, E.J. Lavernia – „Strength and ductility of Bi-modal Cu“ - Adv. Eng. Mater., 13 (2011), pp. https://doi.org/10.1002/adem.201100019
Wang, M. Chen, F. Zhou, E. Ma – „High tensile ductility in a nanostructured metal“ Nature, 419 (2002), pp. 912-915
B. Gao, X. Chen, Z. Pan, J. Li, Y. Ma, Y. Cao, M. Liu, Q. Lai, L. Xiao, H. Zhou – „A high-strength heterogeneous structural dual-phase steel“ J. Mater. Sci., 54 (2019), pp. 12898-12910
Burke, S. Eand Turnbull, P (1952) “Recrystallizations and Grain Growth” Progress in Metal Phys 3
T. Konkova, S. Mironov, A. Korznikov, M.M. Myshlyaev, S.L. Semiatin - Annealing behavior of cryogenically-rolled copper Materials Science and Engineering: 0https://doi.org/10.1016/j.msea.2013.07.042
Volume 585, 15 November 2013, Pages 178-189
Wislei R. Osório, Claudio A. Siqueira, Carlos A. Santos, Amauri Garcia „The Correlation between Electrochemical Corrosion Resistance and Mechanical Strength of As-Cast Al-Cu and Al-Si Alloys“ https://doi.org/10.1016/S1452-3981(23)19680-5
H.N. Girisha, Dr.K.V.Sharma “Effect of magnesium on strength and microstructure of Aluminium Copper Magnesium Alloy” International Journal of Scientific & Engineering Research, Volume 3, Issue 2, February-2012 1 ISSN 2229-5518
E.George, Totten – “Heat Treating of Nonferrous Alloys” 978-1-62708-169-6 Volume 4E 2016 https://doi.org/10.31399/asm.hb.v04e.9781627081696
ZhiHui Gao, Tao Wang, YunLai Zhao, Hua Ding, QingXue Huang – “Mechanical properties optimization and microstructure analysis of pure copper gradient laminates via rolling”, Chinese Journal of Mechanical Engineering. Version 1 posted 13 Jul, 2022 https://doi.org/10.21203/rs.3.rs-1729350/v1
WZ Hан , SD Wu , SX Li, YD Wang “Intermediate annealing of pure copper during cyclic equal channel angular pressing” Materials Science and Engineering: A Volumes 483–484, 15 June 2008, Pages 430-432 https://doi.org/10.1016/j.msea.2006.10.179
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Desislava Dimova, Boyan Dochev, Yavor Boychev
This work is licensed under a Creative Commons Attribution 4.0 International License.
