INVESTIGATION OF THE ЕLASTIC DEFORMATIONS OF THE TECHNOLOGICAL SYSTEM DURING TURNING OF ROTARY SURFACES

Authors

  • Angel Lengerov Faculty of Mechanical Engineering, Technical University of Sofia, Plovdiv Branch (BG)
  • Silviya Salapateva Faculty of Mechanical Engineering, Technical University of Sofia, Plovdiv Branch (BG)
  • Martin Bojakov Faculty of Mechanical Engineering, Technical University of Sofia, Plovdiv Branch (BG)

DOI:

https://doi.org/10.17770/etr2024vol3.8128

Keywords:

elastic deformations, accuracy, turning

Abstract

In the development, analytical dependencies have been derived for determining the stability of the technological system during turning of rotary parts. Cases such as establishment in a chuck, in dead center and between centers have been analysed. The results of the analytical studies will contribute post-processing accuracy to be determined and predicted.

Downloads

Download data is not yet available.

References

A. S. Ymnikova, A. A. Malikova, Fundamentals of mechanical engineering technology. Moscow: Infra – Ingeneria Press, 2020.

A. Świć, A. Gola, Theoretical and Experimental Identification of Frequency Characteristics and Control Signals of a Dynamic System in the Process of Turning. Materials, 14, 2260, 2021.

A. Świć, D. Wołos, A. Gola, G. Kłosowski, The Use of Neural Networks and Genetic Algorithms to Control Low Rigidity Shafts Machining. Sensors, 20, 4683, 2020.

B. Denkena, H. Boujnah, Feeling Machines for online detection Detection and Compensation of Tool Deflection in Milling, CIRP Annals, 67/1 (2018), pp. 423-426

B. Denkena, M.A. Dittrich, S. Jacob, Methodology for Integrative Production Planning in Highly Dynamic Environments, Production Engineering, 13 (2019), pp. 317-324

H. Metev, K. Krumov. Determination of inaccuracy by milling taking into account the phenomenon of technological heredity. 9TH International Scientific Conference "TechSys 2020" – Engineering, Technologies And Systems 14-16 May 2020, Plovdiv, Bulgaria. IOP Conf. Series: Materials Science and Engineering 878 (2020) 012049. doi:10.1088/1757-899X/878/1/011001.

J. Yang, D. Aslan, Y. Altintas, Identification of Workpiece Location on Rotary Tables to Minimize Tracking Errors in Five-Axis Machining, International Journal of Machine Tools and Manufacture, 125 (2018), pp. 89-98

M. Dobrzynski, K. Mietka, Surface Texture after Turning for Various Workpiece Rigidities, Machines, 9, 2021.

S. Sada, Improving the predictive accuracy of artificial neural network (ANN) approach in a mild steel turning operation. Int. J. Adv. Manuf. Tech., 112, 2389–2398, 2021 .

T. Inspergner, B. Mann, et al., Stability of up-milling and down-milling, part 1: alternative analytical methods. International Journal of Machine Tools and Manafacture, 43 (1), pp. 25-34, 2003.

W. Arai, F. Tanaka, M. Onosato, Error Estimation of Machined Surfaces in Multi-Axis Machining with Machine Tool Errors Including Tool Self-Intersecting Motion Based on High-Accuracy Tool Swept Volumes, International Journal of Automation Technology, 12/5 (2018), pp. 680-687

Y. Altintas, D. Aslan, Integration of virtual and on-Line machining process control and monitoring, CIRP Annals, 66 (2017), pp. 349-352

S. Sabev, V. Bakarzhiev, and P. Kasabov. “The Effect of Feed Rate and Cutting Speed to Surface Roughness during hole boring of 32CrMoS4 with anti-vibration boring bar”, (2023).

Downloads

Published

2024-06-22

Issue

Vol. 3 (2024): Environment. Technology. Resources. Proceedings of the 15th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

License

Copyright (c) 2024 Angel Lengerov, Silviya Salapateva, Martin Bojakov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
A. Lengerov, S. Salapateva, and M. Bojakov, “INVESTIGATION OF THE ЕLASTIC DEFORMATIONS OF THE TECHNOLOGICAL SYSTEM DURING TURNING OF ROTARY SURFACES”, ETR, vol. 3, pp. 162–165, Jun. 2024, doi: 10.17770/etr2024vol3.8128.