TASK-ORIENTED TEMPERATURE COMPENSATION AS AN INSTRUMENT FOR REDUCTION OF UNCERTAINTY IN SHOP FLOOR CMM

Authors

  • Miroslav Hristov Technical College - Sofia, Technical University of Sofia (BG)

DOI:

https://doi.org/10.17770/etr2024vol3.8105

Keywords:

Shop Floor Coordinate Measuring Machine, uncertainty, ambient temperature compensation

Abstract

The significance of Shop Floor CMM in inspecting mechanical parts in modern industries, such as automotive and aerospace, has been increasing in recent years, making it an integral part of the inspection process. However, a major issue that remains is the uncertainty, particularly caused by changes in environmental conditions, such as ambient temperature, in shop floor conditions. Task-oriented temperature compensation software can solve these problems. Its effectiveness can be evaluated through uncertainty analysis.

Supporting Agencies
The authors would like to thank the Research and Development Sector at the Technical University of Sofia for the financial support.

Downloads

Download data is not yet available.

References

C. Yinbao, W. Zhongyu, C. Xiaohuai, etc., Evaluation and Optimization of Task-oriented Machines Based on Geometrical Product Specifications, Appl. Sci. 2019, 9, 6; www.mdpi.com/journal/applsci, ISSN: 2076-3417

S. Topfer, G. Linss, etc, Automatic Execution of Inspection Plans with the I++DME Interface for Industrial Coordinate Measurements, M&MS Journal, vol. XIV, no. 1 pp. 71–88, Poland, 2007

T. Jordan and P. A. Taylor, Hacktivism and Cyberwars: Rebels with a cause? London: Routledge, 2004.

ISO 10360 GPS - Acceptance and reverification tests for coordinate measuring machines

ISO 15530 GPS – CMM: Techniques for evaluation of uncertainty of measurement

M. Chiaberge, New Trends and Developments in Automotive Industry, InTech 2011, ISBN 978-953-307-999-8

J. Galán, L. Samek, etc, Advanced high strength steels for automotive industry, iSSn: 0034-8570, eiSSn: 1988-4222, doi: 10.3989/revmetalm.1158

М. Fentahun, М. Savas, Materials Used in Automotive Manufacture and Material Selection Using Ashby Charts, International Journal of Materials Engineering 2018, DOI: 10.5923/j.ijme.20180803.02

J. Rowe, Advanced materials in automotive engineering, Woodhead Publishing Limited, 2012, ISBN 978-0-85709-546-6

https://coolmag.net/polymeric-materials-for-automotive-applications/ - 14.01.24

R. Othman, N. Ismail, etc, Application of carbon fiber reinforced plastics in automotive industry: a review, Journal of Mechanical Manufacturing (J-MFac), Vol 1, 2018

А. Elmarakbi, Advanced composite materials for automotive applications, 2014 John Wiley & Sons, ISBN: 978-1-118-42386-8

ISO 1:2016 GPS - Standard reference temperature for the specification of geometrical and dimensional properties

ISO 5459:2011 GPS - Geometrical tolerancing - Datums and datum systems

M. Mantel, Coordinate measuring machines: A modern inspection tool in Manufacturing, New Jersey Institute of Technology, https://digitalcommons.njit.edu/theses/1246, Theses. 1246

Metrology in Industry, The Key for Quality, French College of Metrology, ISTE Ltd 2006, ISBN-13: 978-1-905209-51-4

E. Madenci, I. Guven, The Finite Element Method and Applications in Engineering Using ANSYS, 2nd Edition, Springer I. P. 2015, ISBN 978-1-4899-7550-8

I. Vrba, R. Palencar, M. Hadzistevic, Different Approaches in Uncertainty Evaluation for Measurement of Complex Surfaces Using Coordinate Measuring Machine, MEASUREMENT SCIENCE REVIEW, Volume 15, No. 3, 2015, 0.1515/msr-2015-0017

Evaluation of measurement data - Guide to the expression of uncertainty in measurement, JCGM 100:2008, JCGM 2008

R. Wilhelml, R. Hocken, H. Schwenke, Task Specific Uncertainty in Coordinate Measurement, CIRP Annals - Manufacturing Technology, Elsevier 2001, https://doi.org/10.1016/S0007-8506(07)62995-3

D. Flack, Measurement Good Practice Guide No. 130: Co-ordinate measuring machine task-specific measurement uncertainties, Crown Copyright 2013, ISSN 1368-6550.

D. Flack, Measurement Good Practice Guide No. 42 - CMM Verification, Queen's Printer and controller of HMSO, July 2001, National Physical Laboratory, ISSN 1368-6550

https://www.aberlink.com/products/coordinate-measuring-machines/extol/ - 14.01.24

Measurement systems analysis (MSA), Reference Manual, Fourth Edition, Copyright 2010 Chrysler Group LLC, Ford Motor Company, General Motors Corporation, ISBN#: 978-1-60-534211-5

T. Allen, Introduction to Engineering Statistics and Lean Six Sigma, Third Edition Springer 2006, ISBN 978-1-4471-7420-2 (eBook), https://doi.org/10.1007/978-1-4471-7420-2

Guide to the Expression of Uncertainty in Measurement Geneva, 1995

ISO 14253 GPS - Inspection by measurement of workpieces and measuring equipment

ISO 23165 GPS - Guidelines for the Evaluation of CMM Test Uncertainty

A. Stadek, Coordinate Metrology, Springer 2020, ISBN 978-3-662-48465-4

A. Weckenmann, M. Knauer, The Influence of Measurement Strategy on the Uncertainty of CMM-Measurements. Annals of the CIRP 47 1, 451 – 454, 1998

Downloads

Published

2024-06-22

Issue

Vol. 3 (2024): Environment. Technology. Resources. Proceedings of the 15th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

License

Copyright (c) 2024 Miroslav Hristov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
M. Hristov, “TASK-ORIENTED TEMPERATURE COMPENSATION AS AN INSTRUMENT FOR REDUCTION OF UNCERTAINTY IN SHOP FLOOR CMM”, ETR, vol. 3, pp. 84–89, Jun. 2024, doi: 10.17770/etr2024vol3.8105.