THE CHANGE OF CONTRAST IS INVESTIGATION OF 75 STEEL SAMPLES LASER MARKED WITH DIFFERENT MODES
DOI:
https://doi.org/10.17770/etr2023vol3.7264Keywords:
laser systems, laser safety, laser beam, optical propertiesAbstract
The quality of the marked surfaces changes the optical characteristics. The aim of the study is to optimize the contrast in laser marking of Steel 75. The influence of the step in the raster marking and the influence of the repetition frequency of the pulses on the reflection coefficient were analysed. The experimental investigations of the reflectance were carried out using a spectrophotometer. For the marked samples, it was found that when directing electromagnetic radiation with a wavelength in the studied range, there are areas with absorption and reflection of light. The reflectance is plotted as a function of marking step and laser frequency for the marked Steel 75 samples.
Downloads
References
Ageev, E.I., Andreeva, Y.M., Brunkov, P.N. et al. Influence of light incident angle on reflectance spectra of metals processed by color laser marking technology. Opt Quant Electron 49, 50, 2017. https://doi.org/10.1007/s11082-016-0876-4
Hui Lu, Yaoquan Tu, Xian Lin, Bin Fang, Duanbin Luo, Aatto Laaksonen, Effects of laser irradiation on the structure and optical properties of ZnO thin films, Materials Letters, Volume 64, Issue 19, 2010, Pages 2072-2075, ISSN 0167-577X, https://doi.org/10.1016/j.matlet.2010.06.022.
Naik, R., Jena, S., Ganesan, R. et al. Effect of laser irradiation on optical properties of Ge12Sb25Se63 amorphous chalcogenide thin films. Indian J Phys 89, 1031–1040, 2015. https://doi.org/10.1007/s12648-015-0678-8
Dawar, A. L., Kumar, A., Sharma, S. et al. Effect of laser irradiation on structural, electrical and optical properties of SnO2 films. J Mater Sci 28, 639–644 (1993). https://doi.org/10.1007/BF01151238
Rafailovich, J., M. Hamad, T. K. Yusop, R. M. Al-Taa’y, Wasan A. Abdullah, Bashar Yousif, Emad. Laser Induced Modification of the Optical Properties of Nano-ZnO Doped PVC Films The effect of continuous CO, pp.1687-9422. https://doi.org/10.1155/2014/787595, 2014, International Journal of Polymer Scienc, Hindawi Publishing Corporation.
Лазов Л., Н. Ангелов, Изследване на контраста във функция от скоростта при лазерно маркиране на образци от стомана, International Scientific Conference, Gabrovo, 2010.
Хаимович, С., Справочник по черни и цветни метали, Техника, С., 1961.
https://metinvestholding.com/bg/products/steel-grades/1075
Dolchinkov N., Practical research of marking and cutting of textiles with increased resistance, using CO2 laser, Journal of Physics: Conference Series, Volume 1681, 2020, 1681 012014 IOP Publishing The 6th International Conference on Chemical Materials and Process 2-4 July 2020, Warsaw, Poland, doi:10.1088/1742-6596/1681/1/012014, Online ISSN: 1742-6596, Print ISSN: 1742-6588
Dolchinkov N., Marking and Cutting of Non-metallic Products with CO2 Laser, IOP Publishing Ltd, Journal of Physics: Conference Series, Vol. 2224, 2021 2nd International Symposium on Automation, Information and Computing (ISAIC 2021) Online ISSN: 1742-6596, Print ISSN: 1742-6588, рр 1-8
Dolchinkov N., L. Lazov, J. Ivanov, D. Nedyalkov, L. Linkov, Study of cutting and labeling of polymethylmethacrylate using a CO2 laser, 12th International Scienfic and Practical conference Environment. Technology. Resources. doi.org/10.17770/etr2019, vol. 3.4203, ISBN 1691-5402, pp. 37-40
Lazov, L., Petrov, N. & Teirumnieks, E.. Investigation of the influence of the number of repetitions on the process of laser marking of HS6-5-2-5 steel. Environment. Technologies. Resources. Proceedings of the International Scientific and Practical Conference. 3, 2021, 163-167. 10.17770/etr2021vol3.6567.
Lazov L., Teirumnieks E., Angelov N.; Yankov E., Modification of the roughness of 304 stainless steel by laser surface texturing (LST), Laser Physics, Laser Physics, Volume 33, Number 4 , 2023, DOI 10.1088/1555-6611/acbb76.
Колева, К., В. Маринова. Математическите модели в химията, Сборник научни статии „Междупредметни връзки в обучението по математика и информатика” по проект “Междупредметни връзки в обучението по математика и информатика – дидактически модели и технологии”, Издателство „Ивис”, В. Търново, с. 28-35, 2009, ISBN 978-954-8387-49-1, COBISS.BG-ID – 1231378404,.
Колева, К., Три математически модела за изравняване на химични уравнения, Сборник доклади от Годишната университетска научна конференция на НВУ “Васил Левски”, В. Търново, том 3, Научно направление „Природоматематически науки”, с. 131-144, Издателски комплекс на НВУ „В. Левски”, 2020, ISSN 1314-1937.
N. Tonchev, E. Yankov, Multi-criteria support for decision-making by shifting restrictions, in Proceedings of the International Scientific Conference “Mathematical Modeling”, 12.2017, DOI: 10.13140/RG.2.2.13458.35520.
Tontchev, N.; Hristov, N. Numerical Procedure to Determine the Optimal Composition of the Steel a Small Volume Database with the Same Treatment. International virtual journal for science, technics and innovations for the industry, Machines, Technologies, Materials, VII, 2013, 11: 54-57.
Leoneed M. Kirilov, Nikolai T. Tontchev, Alexander L. Monov, Multiple Criteria Approach to Solving Problems of Metal Building-Up by Welding,IFAC Proceedings Volumes,Volume 37, Issue 19, 2004, Pages 255-260, ISSN 1474-6670, https://doi.org/10.1016/S1474-6670(17)30693-6.
