EXPERIMENTAL REMOTE DETERMINATION OF THE STATIC CHARACTERISTIC OF THE ARC IN TIG WELDING
DOI:
https://doi.org/10.17770/etr2023vol3.7203Keywords:
TIG welding, Static characteristic of welding arcAbstract
In the conditions of TIG welding, the magnitude of the current is set, but not the voltage of the arc. To determine the arc voltage at a set current, arc length, type of electrode, sharpening angle and others, it is necessary to know the static characteristics of the welding arc. This dependence facilitates the use of simulation modelling methods of welding processes. In the proposed study, the static characteristics of the welding arc in TIG process with 4 types of electrodes were determined experimentally. The magnitude of the current was set in the range of 20 to 200A and the arc voltage was measured. All parameters are measured remotely by a real-time welding monitoring system and transferred to a remote computer via the Internet. Graphs were built based on the recordings, and the numerical results were processed and regression relationships were obtained.
Downloads
References
Álisson Fernandes da Rosa, Felipe Batista, Victor Igor Berbare Lemos, Régis Henrique Gonçalves e Silva. EXPERIMENTAL ANALYSIS ON THE PERFORMANCE OF SMA WELDING ELECTRODES. 26th ABCM International Congress of Mechanical Engineering, November 22-26, 2021. Florianópolis, SC, Brazil.
Wooho Kim, Yong-Jung Kim and Hyosung Kim. Arc Voltage and Current Characteristics in Low-Voltage Direct Current. Energies 2018, 11, 2511; doi:10.3390/en11102511, https://www.mdpi.com/journal/energies
Antoni Sawicki. Static Characteristics of Defined Ignition Voltage Used in the Modelling of Arc within a Wide Range of Current Excitation. Bulletin of the Institute of Welding, Biuletyn Instytutu Spawalnictwa, ISSN 2300-1674=
Li, Y., Yang, J.C., Liu, Z. Welding performance of tungsten electrodes with different contents of rare earth oxides. (2015) Materials Science Forum, 814, pp. 631-635. DOI: 10.4028/www.scientific.net/MSF.814.631
H. Dong ; M. Cong ; Yu. Zhang; Yu. Liu ; H. Chen, Real time welding parameter prediction for desired character performance (2017), IEEE International Conference on Robotics and Automation (ICRA), 2017
Wang, R., Xue, J. Study on arc length stability of pulsed MIG welding based on average output characteristics of pulse cycle. (2012) Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 48 (10), pp. 50-55, DOI: 10.3901/JME.2012.10.050
Zhou, C.-F., Jiao, X.-D., Xue, L., Chen, J.-Q., Wang, Z.-H., Lu, T., Fang, X.-M. Arc static characteristics of gas tungsten arc welding under high air ambient pressure. (2008) Shiyou Huagong Gaodeng Xuexiao Xuebao/Journal of Petrochemical Universities, 21 (1), pp. 66-69.
Martínez, A., Blasco, N., Pérez, F.J., Vicuña, J.E., Lacámara, I., Oliva, J.A. Static output characteristic of a peak current controlled arc welding machine. (2006) Midwest Symposium on Circuits and Systems, 1, art. no. 4267220, pp. 636-639. DOI: 10.1109/MWSCAS.2006.382143W.-K. Chen, Linear Networks and Systems. Belmont, CA: Wadsworth, 1993, pp. 123-135.
Deyan Gradinarov, Set up for real time capturing of welding parameters (2021), Proceedings of the VI International Scientific Conference Winter Session. Volume 2, 259-260
Tongov M., Gradinarov D., Tashev P., Experimental Determination of Static Characteristic of Welding Arc in TIG Welding (2022), Bulgarian Society for NDT International Journal “NDT Days”, Volume V, Issue 3, Year 2022, pp.152-160
