DEVELOPMENT OF A METHOD FOR CONTACTLESS TEMPERATURE MEASUREMENT IN 3 SPECTRAL RANGES
DOI:
https://doi.org/10.17770/etr2023vol3.7184Keywords:
differential photo receiver, temperature, method, IR diapason, lens designAbstract
A 3-spectral method for non-contact temperature measurement has been developed. Three silicon photodiodes were used. The separation of the spectrum is done by optical bandpass filters and beamspliters. It is possible to work in three modes: three-spectral, two-spectral (spectral ratio) and one-spectral. In the first mode, the temperature of objects with an unknown and variable emissivity can be measured. The last two modes give good results respectively for gray bodies and for objects with known emissivity.
Downloads
References
Z. M. Zhang, B. Tsai and G. Machin. Radiometric temperature measurements, Berlin: Elsevier, 2009.
V. Vavilov and D. Burleigh, Infrared Thermography and Thermal Nondestructive Testing, Springer International Publishing: New York, NY, USA, 2020.
K. Grujić, "A Review of Thermal Spectral Imaging Methods for Monitoring High-Temperature Molten Material Streams", Sensors, Vol. 23, Issue 3, Febr. 2023, doi: 10.3390/s23031130.
M.A. Khan, C. Allemand and T.W. Eagar, “Noncontact temperature measurement. I Interpolation based techniques”, Review of Scientific Instruments, Vol. 62, Issue 2, pp. 392 – 402, 1991, doi: 10.1063/1.1142133.
T. Fu, X. Cheng and X. Yang, “Theoretical evaluation of measurement uncertainties of two-color pyrometry applied to optical diagnostics”, Applied Optics, Vol. 47, Issue 32, pp. 6112 – 6123, Nov. 2008, doi: 10.1364/AO.47.006112.
B.K. Tsai, R.L. Shoemaker, D.P. DeWitt, B.A. Cowans, Z. Dardas, W.N. Delgass and G. J. Dail, “Dual-wavelength radiation thermometry: emissivity compensation algorithms”, International Journal of Thermophysics, Vol. 11, Issue 1, pp. 269 – 281, Jan. 1990, doi: 10.1007/BF00503877.
P.B. Coates, “Multi-wavelength pyrometry”, Metrologia, Vol. 17, Issue 3, pp. 103 – 109, 1981, doi: 10.1088/0026-1394/17/3/006.
A. Araújo, “Analysis of multi-band pyrometry for emissivity and temperature measurements of gray surfaces at ambient temperature”, Infrared Physics and Technology, Vol. 76, pp. 365 – 374, May 2016, doi: 10.1016/j.infrared.2016.03.014.
W. Wójcik, V. Firago, A. Smolarz, I. Shedreyeva and B. Yeraliyeva, “Multispectral High Temperature Thermography”, Sensors 2022, 22, 742, doi: 10.3390/s22030742.
T. Fu, X. Cheng, X. Fan and J. Ding, “The analysis of optimization criteria for multi-band pyrometry”, Metrologia, Vol. 41, Issue 4, pp. 305 – 313, August 2004, doi: 10.1088/0026-1394/41/4/012.
V. Firago and W. Wojcik, “High-temperature three-colour thermal imager”, Przeglad Elektrotechniczny, Vol. 91, Issue 2, pp. 208–214, 2015, doi: 10.15199/48.2015.02.47.
H. Madura, M. Kastek and T. Piatkowski, “Automatic compensation of emissivity in three-wavelength pyrometers”, Infrared Physics and Technology, Vol. 51, Issue 1, pp. 1 – 8, July 2007, doi: 10.1016/j.infrared.2006.11.001.
P. Saunders, “Reflection errors and uncertainties for dual and multiwavelength pyrometers”, High Temperatures - High Pressures, Vol. 32, Issue 2, pp. 239 – 249, 2000, doi: 10.1068/htrt201.
A. Sala, Radiant Properties of Materials, PWN & Elsevier, 1986.
D. P. DeWitt and J. C. Richmond, “Thermal radiative properties of materials,” in Theory and practice of radiation thermometry, 1988, pp. 171–175.
D.Y. Svet, Determination of the emissivity of a substance from the spectrum of its thermal radiation and optimal methods of optical pyrometry, High Temp. – High Press., Vol. 8, Issue 5, pp. 493 – 498, 1976.
T. Hartsfield, A. Iverson and J. Baldwin, “Reflectance determination of optical spectral emmisivity of metal surfaces at ambient conditions,” Journal of Applied Physics, Vol.124, Issue 10, Sept. 2018, doi: 10.1063/1.5042601.
M.J. Marinov, B.I. Stoychev, D.M. Guteva and M.V. Georgiev, “Computer modeling and geometric analysis of Click-Clack mechanisms”, Journal of Mechanics of Machines, vol. 118, pp.35-39, 2016.
Dichev, D., F. Kogia, H. Nikolova, D. Diakov. A Mathematical Model of the Error of Measuring Instruments for Investigating the Dynamic Characteristics. Journal of Engineering Science and Technology Review. Volume 11, Issue 6, 2018, pp. 14-19, doi: 10.25103/jestr.116.03.
