POSTPROCESSOR AND MACRO PROGRAM FOR CALCULATION OF THE DISPLACEMENTS OF THE WORKING COORDINATE SYSTEMS WHEN WORKING BY THE METHOD 3 + 2 AXES

Authors

  • Tsvetan Kaldashev Technical university of Sofia (BG)

DOI:

https://doi.org/10.17770/etr2021vol3.6512

Keywords:

CNC, 3 2 axis, postprocessor, Euler angles

Abstract

Тhis article discusses the possibility of developing a postprocessor and macro program for automatic calculation and input of the displacements in the working coordinate systems when working by the method 3 + 2 axes. The ability to take the information from the CL Data file and its subsequent use by a macro program for certain calculations is used. For this purpose, a generalized G-POST postprocessor and a specialized FIL language are used.

Downloads

Download data is not yet available.

References

Haas Mill Operator’s manuals, Next Generation Control 96-8210 Revision F December 2017 English

Mazatrol SmoothX Programming manuals, EIA/ISO program, 2019

Hadjiiski P., Programming of CNC machine tools, Tehnical university of Sofia, 2010, ISBN 978-954-438-865-2A

Ben Groves, Macro B programming manual

Slavov, S., Dimitrov, D., Iliev, I., Variability of regular relief cells formed on complex functional surfaces by simultaneous five-axis ball burnishing, (2020) UPB Scientific Bulletin, Series D: Mechanical Engineering, 82 (3), pp. 195-206.

Downloads

Published

2021-06-16

Issue

Vol. 3 (2021): Environment. Technology. Resources. Proceedings of the 13th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

How to Cite

[1]
T. Kaldashev, “POSTPROCESSOR AND MACRO PROGRAM FOR CALCULATION OF THE DISPLACEMENTS OF THE WORKING COORDINATE SYSTEMS WHEN WORKING BY THE METHOD 3 + 2 AXES”, ETR, vol. 3, pp. 130–133, Jun. 2021, doi: 10.17770/etr2021vol3.6512.