AN ALTERNATIVE APPROACH TO REDUCING AGING OF INNOVATIVE INDUSTRIAL PRODUCTS IN TERMS OF INDUSTRY 4.0
DOI:
https://doi.org/10.17770/etr2021vol3.6507Keywords:
innovative aging, engineering space, modernizationAbstract
The rapid progress in the field of industrial and information-communication techno-logies and their impact on production systems are putting increasing pressure on the engineering structure. That is why modern technological deve-lopment has created conditions in which innova-tive obsolescence already takes precedence over physical. A particularly important point in this direction is the correct determination of the degree of influence of innovative aging on products and processes in order to establish its impact on the technical, economic and social results of industrial activity. In addition, the impact of this process is globalizing, resulting in innovative obsolescence of technology and lagging behind the level of advan-ced technologies from modern ones world-wide. The further use of innovatively obsolete equipment and technological processes leads to certain losses, the amount of which will depend on the degree of this lag. This report proposes an alternative approach to reducing the innovative obsolescence of industrial products by modernizing and creating sustainability in the engineering space. At the same time, innovative progress in the future will put increasing pressure on the technological structure and on the distinctive features of this process. A theoretical attempt has been made to calculate mathematically innovative aging, and the impact of destructive innovations is difficult to capture with this model.
Downloads
References
Demirova, S., Innovative obsolescence and its impact on pro-duction development of industrial products, International scientific journal "Innovation", Year VI, ISSUE 1/2018, pp.7-9
Damianov, D., Modern alternatives to rapid innovative aging, Scientific Bulletins of NTS in Mechanical Engineering, Year XXVI, Vol. 3/224, ISSN 1310–3946, 27 ISTC “ADP 2018”, June 2018, pp. 278-283.
Kartunov S., D. Petrova, Database management system for automated design of micromechanical components for products in microsystem engineering, Proceedings of the 3rd International Conference „Research and Development in Mechanical Industry“, Volume 3, Herceg Novi, Serbia and Montenegro, Trstenik: High Technical Mechanical School, Kruševac: Institute IMK “14 Ovtomber” and Podgorica: Institute of Mechanical Engineering, 2004, р. 1154-1586, ISBN 86-83803-08-2, p.1546-1552.
Kartunov, S., N., Nenov, Training in and development of Mechatronics and micro- and nano-systems technology in the Technical university of Gabrovo, Bulgaria, 6th International Conference “Competence of Contemporary Specialist: The unity of Theory and Practice”, Kaunas, 2012/6(I), ISSN 2029-4557, p. 79-84.
Mitev,I., Influence of the Type of Iron Powder of the Tensile Strength of Iron Carbon Powder Materials Alloyed with Cooper, International Journal of Engineering and Advanced Technology (IJEAT), Volume 4, Issue 4, 2015, рp.156÷159, ISSN (online) 2249-8958.
Mitev,I, Dimensional Change During Sintering of Samples of the Fe-Cu System, International Journal of Emerging Technologies in Computational and Applied Sciences (IJETCAS), ISSUE 8, vol.5, 2014, p.433÷436, ISSN (online) 2279-0055, ISSN (print) 2279-0047.
Mitev,I., Optimizing of induction heating depending of the electromagnetic field – part|II, 13th International conference RaDMI 2013, Kopaonik, Serbia, 12÷15 September, 2013, vol.2, p.888÷893.
Nenov., N., P., Tomchev, R., Ivanova, Study of the Ion Radiation Influence on the Parameters of Unijunction Tran-sistors, 9th International Scientific and Practical Confe-rence “Environment. Technology. Resources”. Vol.1, Latvia, Rēze-kne, 2013. Rēzekne: Rēzeknes Augstskola, RA izdevniecība, 2013, ISSN 1691-5402, ID in database – 16424, pp.137-139.
Nikolova, N., Information man under the knowledge change conditions – SATERRA 2001, Journal of the University of Applied Sciences Mittweida, SATERRA 2001, Band II, p.33-38, Internationale Wissens chaftliche Konferenz, ISSN 1437-7624
Nikolova, Neli, Intellectual Capital Management used for Optimizing the Activities of Modern Small and Medium Enterprises/Companies. 4th International Conference Econo-mics and Management-Based on New Technologies, EMoNT 2014, 12-15 June 2014, Vrnjačka Banja, Serbia., pp.258-262, ISBN 978-86-6075-045-9.
Nikolova, Neli, Entrepreneurial “Blue” Practices for Sus-tainable Development and Resources Efficiency, 12th Inter-national Scientific and Practical Conference “Environment. Technology. Resources”, June 20-22, 2019, Rezekne Academy of Technologies, Rezekne, Latvia, Volume I, 198-203, ISSN 1691-5402, ISSN 2256-070X.
Petrova, D., Analysis of SMEs in Bulgaria – Assessment of Their Innovation Activities, Rezekne 2013, Latvia, Rezekne Higher Education Institution, Faculty of Engineering, Scientific Institute for Regional Studies, Environment. Technology. Resources, Proceedings of the 9th International Scientific and Practical Conference June 20-22, 2013, Volume 3, ISSN 1691-5402,pp 46-49. scopus
Petrova, D., Intelligent, Innovative and Sustainable Industry in Bulgaria – Prospekts and Challenges, Environment. Technology. Recourses – Proceeding of the 12-th International Scientific and Practical Conference, Rezekne Academy of Technologies, Rezekne, Latvia, 2019, ISSN 1691-5402, p. 210-215.
Tomchev, P., N., Nenov, R., Ivanova, Instantaneous water heater with induction heater operating with grid frequency, „Research and Development in Mechanical Industry“ RaDMI 2012, 13-17 September 2012, Vrnjačka Banja, Serbia, SaTCIP Ltd., Technical-Mechanical School in Trstenik, ISBN 978-86-6075-036-7, Volume II, pp. 1214-1218.
http.www.mee.government.bg
http.www.eib.org
http.www.mag.innov.ru
