STUDY ON THE ADSORPTION CHARACTERISTICS OF CONGO RED BY SYCAMORE BARK ACTIVATED CARBON
DOI:
https://doi.org/10.17770/etr2017vol1.2600Keywords:
sycamore bark activated carbon, Congo red, adsorption kinetics, thermodynamicsAbstract
The activated carbon was prepared from sycamore bark by activation of zinc chloride. The absorbing effect of activated carbon on Congo red wastewater is studied. The characteristics of sycamore bark activated carbon were characterized by SEM and BET. The effects of adsorbent dosage, time, and shaking speed on the adsorption properties of Congo red by sycamore bark activated carbon were studied. The isotherm, kinetics, and thermodynamics of adsorption were explored. The results revealed that the activated carbon contain a large apparent mesopores. Adsorption efficiency was increased with enhancing the adsorption dosage and time. The removal rate of Conge red reached to 98.2% under room temperature with adsorbent dosage of 3.0 g/L, adsorption time of 120 min, shaking speed of 60r/min. The adsorption of Congo red on sycamore bark activated carbon was followed Langmuir isotherm model and Lagergren pseudo-second order kinetics model. The adsorption was spontaneous, endothermic, and the entropy was increasing in the adsorption process.Downloads
References
Xie Z M, Chen Z, Dai YZ. Preparation of Sepiolite Complex Sorbent and Its Treatment Properties for Dyeing Wastewater. Environmental Science and Technology 32. 2009, pp, 130133(in Chinese).
Jiang BQ, Xiao ZQ.Preparation of Copper Oxide Loaded Activated Carbon by Waste Sawdust for Acid Red GR Wastewater Treatment. Adv. Mater. Res., 2011,pp, 356/360:395398.
Hu J, Zhang J, Wang C P, et al. Adsorption Mechanism of Modified Wheat Shell Husk for Conge Red from Aqueous Solutions. New Chemical Meterials 43. 2015, pp, 163172(in Chinese).
Yu M Q, Yang J B, Lin J Q, et al. Adsorption of Congo Red Dye by Modified Honeycomb Coal Burnt Cinder. The Chinese Journal of Process Engineering 16. 2016,pp, 110114(in Chinese).
Wei X L, Feng L L, Yang Q, et al. Adsorption of Conge Red from Aqueous Solution by Modified Cotton Shell. Chinese Journal of Environmental Engineering 10. 2016, pp, 2934(in Chinese).
Ren N Q, Zhou X J, Guo W Q,et al. A Review on Treatment Methods of Dye Wastewater. Journal of Chemical Industry and Engineering 64. 2013,pp, 8494(in Chinese).
Xue F L, Zhang Y Q. Research Progress of Dye Wastewater Disposal Technology. Water Sciences and Engineering Technology. 2007, pp, 2629(in Chinese).
Nirav PR, Prapti US, Nisha KS. Adsorptive Amputation of Hazardous Azo Dye Congo Red from Wastewater: A Critical Review. Environ. Sci.Pollut. Res. 23. 2016, pp, 14810–14853.
Zhou M, Zhu S F, Liu S B, et al. Adsorption of Dye Wastewater by Banana Peel Powder Immobilized by Sodium Alginate. Techniques and Equipment for Environmental Pollution Control 7. 2013, pp, 22082212(in Chinese).
Asha S, Virarahavan T. Decolorization of Dye Wastewater by Biosorbents: A Review. J. Environ. Manage. 91. 2010, pp, 19151929.
Luo P, Xu Y C, Zhang H. Adsorption Property of Active Carbon onto Dyeing Wastewater. Dyeing and Finishing. 2016, pp, 1420(in Chinese).
Meng F P,Yi H C. Application of Different Adsorbents on Dyeing Wasterwater Treatment. Materials Review 23. 2009, pp, 6973(in Chinese).
Wei X L, Yu Z M, Wu K, et al. Preparation of Activated Carbon from Dewatered Sludge by Chemical Activation with KOH. Applied Chemical Industry 43. 2015, pp, 463469(in Chinese).
Munagapati VS, Kim DS. Adsorption of Anionic Azo Dye Congo Red from Aqueous Solution by Cationic Modified Orange Peel Power. J. Mol. Liq., 220. 2016,pp,540548.
Zhang R, Ge Y. Adsorption of Cationic Dye by Surfactant-modified Activated Carbon. Techniques and Equipment for Environmental Pollution Control 7. 2013, pp, 22332238(in Chinese).
He Z J, Lu Y Q, Zhang H, et al. Congo Red Adsorption from Wastewater by Activated Carbon of Pomelo Peel.Journal of Guilin University of Technology 35. 2015, pp, 147151(in Chinese).
Zhao E L, Wang M L, Fan J F. Adsorption of Congo Red by Peanut Shells. Journal of Ecology and Rural Environment 26. 2010, pp, 372375(in Chinese).
Feng L L, Wei X L,Zhang N, et al. Preparation and Characterization of Activated Carbon from Sycamore Bark by Zinc Chloride. Journal of Fuyang Normal University (Natural Science) 33. 2016, pp, 4145(in
Chinese).
Yu Z M, Wei X L, Lou M S, et al. Preparation and Characterization of Activated Carbon from Bio-char by Chemical Activation with ZnCl2. Chemical Industry and Engineering Progress 33. 2014, pp, 33183323(in Chinese).
Yao H, Zhang S C, Shen Y, et al. Preparation and Characterization of Sludge Activated Carbon. Techniques and Equipment for Environmental Pollution Control 6. 2012, pp, 21382142(in Chinese).
Wang L L, Long L J, Chen X P, et al. Characterization of Mesoporous Activated Carbon from Camellia Oleifera Shell and Study on Its Porous Structure. Journal of Chemical Engineering of Chinese Universities 27. 2013, pp, 297303(in Chinese).
Nautiyal P, Subramanian KA, Dastidar MG. Adsorptive Removal of Dye Using Biochar Derived from Residual Algae after in-situ Transesterification: Alternate Use of Waste of Biodiesel Industry. J. Environ. Manage. 182. 2016, pp, 187197.
Wu Y, Luo H J, Wang H. Adsorption Properties of Modified Sawdust for Conge Red Removal from Wastewater. Acta Scientiae Circumstantiae 34. 2014, pp, 16801688(in Chinese).
Liu L, Liu J, Li H, et al. Equilibrium, Kinetic, and Thermodynamic Studies of Lead(II) Biosorptionon Sesame Leaf. Bioresour. Technol. 7. 2012, pp, 35553572.
Wei X L, Bao X Y, Wu k, et al. Adsorption of Cr(VI) from Aqueous Solution by Modified Cotton Shell. Technology of Water Treatment 42. 2016, pp, 3647(in Chinese).
Huang X D, Lou B Y. Study on the Adsorption of cetyltrimethylAmmonium Bromide from Aqueous Solutions with Durian Shell. Journal of Jinggangshan University(Natural Sciences Edition). 2013, pp, 2227(in Chinese).
Rao TM, Rao VV B. Biosorption of Congo Red from Aqueous Solution by Crab Shell Residue: A Comprehensive Study. SpringerPlus 5. 2016, pp, 537551.
Liu J, Zhu Q X, Tan X W, et al. Adsorption of Methyl Orange on Modified Activated Carbon. The Chinese Journal of Process Engineering 16. 2016, pp, 223227(in Chinese).